by Smart2Move | Mar 12, 2019 | Course / Explanation
What is the Moment and the Torque on The S2M Dual 3D Force plates? I think some explanations are needed to not confuse everybody about moment and torque with force plates, so from a kinetic point of view! As an introduction, I would specify that the Torque is to the...
by Smart2Move | Mar 12, 2019 | Course / Explanation
Why would a Dual Force Plate make more sense to analyse a swing? Smart2Move has developed a dual Force plate, in order to give you more useful information than a single Force plate, and here’s why. The Total CoP (Center of Pressure) Trace and vertical Force are...
by Smart2Move | Mar 12, 2019 | Course / Explanation
The Double Peak of Force As referred in a previous article, the high peak force optimally must occur before impact to efficiently transfer the ground reaction force to the club head. If the maximum peak of ground reaction force is created and then delivered at impact...
by Smart2Move | Mar 12, 2019 | Course / Explanation
The Bubble The S2M Dual force plates can measure independently the amount of force applied under each foot during the swing. In the backswing, we measure the difference of the amount of force being applied between each foot. The S2M Dual force plates can measure...
by Smart2Move | Mar 12, 2019 | Course / Explanation
The Line of Pressure (LoP) The Line of Pressure (LoP) is the line joining the Center of Pressure (CoP) of each foot, versus the target line. There is a correlation between the direction of the LoP during transition, downswing, and the swing direction at impact. The...
